SPEED CALIBRATION AT ASTON MARTIN
Press the return button 5 times (confirmation via the hazard warning lights) = on the left side of the steering wheel are the handset hang-up button and the handset pick-up button, this allows you to decrease speed with the handset hang-up button and increase it with the handset pick-up button. Press the respective key several times in quick succession to set the speed.
Then press the reset button 8 times to save the settings (confirmation via the hazard warning lights).
It is best to do all this at a constant speed so that you can constantly see the difference and compensate for them through this process.
ACTIVATION & DEACTIVATION
Change modes via smartphone app or press and hold the HOME button for 10 seconds
Repeat the process to switch from mode to mode
All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.
The module is always pre-activated in MODE 1 / ON
Mode 1
10%-20% of the actual mileage is counted
The speedometer works without any interference. Lane Assist, Park Distance Control, and Reversing camera work as usual. The range and average consumption still might not be counted accurately
Mode 2
0 % - 2% of the actual mileage is counted
The speedometer works without any malfunction. The average consumption and range are not calculated correctly, but the tank level is always accurate. The range works independently of the tank level. Lane assistant works depending on the equipment of the car. To use all functions, switch off the device and everything works as usual. Other assistance systems work as usual
Aston Martin Valour Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
Mode 3
100% of the actual mileage is counted
The module is deactivated and everything works as usual