THIS DEVICE IS SUITABLE FOR ALL MERCEDES - GLE W166/C292 MODELS MADE FROM 2015 TO 2018

●     Does not cause errors in the operation of other devices in the car

●     Easy Installation

●     Can be switched off while driving

●     Activated on the spot and on the move

●     Reliable connectors and heat-resistant cables

●     Leaves no trace in memory

●     Mobile app control

STOP MILEAGE FILTER FOR MERCEDES - GLE W166/C292

MERCEDES - GLE W166/C292 mileage stop filter is sometimes referred to as: mileage blocker, odometer blocker, odometer limiter, speedometer blocker, mileage limiter, mileage filter, rarely as a mileage stop tool.

SPECIFICATIONS

●     only high-quality accessories are included in the package of delivery;

●     leaves no residue when removed: no soldering or cutting of cables required;

●     the ability to quickly turn on and off the device (Plug & Play);

●     disabling the module does not change the mileage readings;

●     during diagnostics, it is impossible to determine the mileage changed by the - MERCEDES - GLE W166/C292 mileage blocker;

●     make the setting once, and it will be saved unconditionally;

●     the speedometer and other auxiliary systems work flawlessly;

●     Does not cause errors in the operation of other devices in the car

●     the dimensions of the connectors of the device are precisely calculated for the standard ones;

ACTIVATION AND DEACTIVATION

Activation and deactivation is carried out by regular buttons or from a mobile application. With the app, you can connect your car to your smartphone via Bluetooth. Once connected, you manage mileage accounting.

Changing the mode - holding the "BACK" button for 10 seconds.

Mode 1

accounting mileage 0%, speedometer not working

Mode 2

10% mileage allowance

Mode 3

50% mileage allowance

Mode 4

0% mileage counting, speedometer works

Mode 5

100% mileage accounting

The device can be activated or deactivated both on the move and on the spot.

If the speed is not displayed correctly, you need to calibrate.

To start calibration, press the return button 10 times when the module is on. Calibration is best done at 60 km/h or 60 mph

Then you can adjust the speed using the up and down arrow buttons. (Attention, press the buttons at intervals and watch the speed change on the speedometer while driving).
If the speed is set correctly, press the OK button until confirmation appears (the speedometer needle drops to 0 km/h or the car beeps 1 time).
To exit the calibration mode, press the return button 12 times.