THIS DEVICE IS SUITABLE FOR ALL MERCEDES - V CLASS / VITO W447 MODELS MADE FROM 2013 TO 2019

●     Easy Installation

●     Can be switched off while driving

●     Activated on the spot and on the move

●     Reliable connectors and heat-resistant cables

●     Leaves no trace in memory

●     Mobile app control

STOP MILEAGE FILTER FOR MERCEDES - V CLASS / VITO W447

MERCEDES - V CLASS / VITO W447 mileage stop filter is sometimes referred to as: mileage blocker, odometer blocker, odometer limiter, speedometer blocker, mileage limiter, mileage filter, rarely as a mileage stop tool.

SPECIFICATIONS

●     only high-quality accessories are included in the package of delivery;

●     leaves no residue when removed: no soldering or cutting of cables required;

●     the ability to quickly turn on and off the device (Plug & Play);

●     disabling the module does not change the mileage readings;

●     during diagnostics, it is impossible to determine the mileage changed by the - MERCEDES - V CLASS / VITO W447 mileage blocker;

●     make the setting once, and it will be saved unconditionally;

●     the speedometer and other auxiliary systems work flawlessly;

●     Does not cause errors in the operation of other devices in the car

●     the dimensions of the connectors of the device are precisely calculated for the standard ones;

ACTIVATION AND DEACTIVATION FOR VITO / METRIS

Activation and deactivation is carried out by regular buttons or from a mobile application. With the app, you can connect your car to your smartphone via Bluetooth. Once connected, you manage mileage accounting.

Changing the mode - holding the "BACK" button for 10 seconds.

Mode 1

accounting mileage 0%

Mode 2

10% mileage allowance

Mode 3

50% mileage allowance

Mode 4

100% mileage accounting

ACTIVATION AND DEACTIVATION FOR V-CLASS

ON mode

accounting mileage 0%

OFF mode

100% mileage accounting

The device can be activated or deactivated both on the move and on the spot.

If the speed is not displayed correctly, you need to calibrate.

To start calibration, press the return button 10 times when the module is on. Calibration is best done at 60 km/h or 60 mph

Then you can adjust the speed using the up and down arrow buttons. (Attention, press the buttons at intervals and watch the speed change on the speedometer while driving).
If the speed is set correctly, press the OK button until confirmation appears (the speedometer needle drops to 0 km/h or the car beeps 1 time).
To exit the calibration mode, press the return button 12 times.