The AUDI Mileage Blocker now has 4 modes. Mode 4: Everything in original condition
In the first mode, you can now completely stop counting up the kilometer/mileage and the speedo works.
Three more modes with different percentages of mileage/kilometer counting from 5% to 10%.

All AUDI Adaptive Driver Assistance systems works like:
Adaptive cruise control
Audi traffic jam assist
Audi active lane assist
Speed limit display
Audi pre sense
Audi turn assist
Audi park assistant
Audi trailer assistant
Night vision assistant
adaptive light and many more.

Original connectors for the automotive sector Plug & Play connectors
Codings like Mating face and Ridges on the connector prevent incorrect connection.
Heat-resistant and durable cable from the automotive industry.

MILEAGE BLOCKER WITH WORKING SPEED INDICATOR:

The activation of this Mileage/Kilometer Freezer with working speed indicator on the Audi with virtual cockpit or even with normal speedometer (with pointers) is done by pressing the OK button for 10 seconds, which is located on the steering wheel. Press Ok button for 10 seconds → Mode 1. Ok button for 10 sec. Press → Mode 2

Function mode Mode 1: The actual/real speed is displayed permanently on the Cluster – 0% of the distance driven is counted.
(For this you have to activate mode 1. and park/turn off the car for 2 minutes)

       Mode 2: The actual speed is displayed permanently – only 5% of the actually driven distance is counted. 100/5

       Mode 3: The actual speed is displayed permanently – only 10% of the actually driven distance is counted. 100/10

       Mode 4: Everything in original condition

In each mode, all assistance systems works normaly

Percentages of the kilometer/mileage count can vary by a few percent from Mode 3, depends on the year of construction and tire size. (+ – 3 to 5%)

ACTIVATION OF THE CAN FILTER/BLOCKER FOR AUDI WITHOUT SPEED INDICATOR:

Activation / deactivation of the odometer filter:

Mode 1

Simultaneously press the return button ↩️ on the steering wheel and the arrow key to the left,
the kilometers are not recorded.
The Km / h speedometer always works up to a speed of 20 km / h.
Above 20 km / h the speedometer works for 10 seconds. (Acceleration phase)
After 10 seconds, the Km / h speedometer stops and drops to zero.
If you come to a standstill or a speed below 20 km / h, the correct speed will be displayed again for 10 seconds.

The head up display always shows the actual speed

Mode 2

If you simultaneously press the return button on the steering wheel and the OK button,
Only half of the kilometers driven will be recorded. (50%)
The tachometer in this mode works continuously but displays half the actual speed.
The head up display always shows the actual speed

Mode normal

Simultaneously b the return button on the steering wheel and the button to the right,
The kilometers/mileage are recorded completely and everything works as usual.

The device saves the setting automatically and does not require any additional activation after rebooting.
Each mode can be activated or deactivated at any time, both while driving and while stationary.

CAN BLOCKERS FOR Q7 SQ7 ADVANTAGES:

Easy and fast to install, original high-quality plug-in system via plug and play
No soldering or cutting wires required
When active, the kilometers/mileage are not recorded
No error messages in the speedometer or navigation
Otherwise there are no error messages in the dashboard
If the speedometer is deactivated, the mileage will be recorded as usual
A digital installation guide is included
The confirmation of the activation takes place in the tachometer
This Can Emulator is suitable for testing and tuning purposes