AUDI TT RS – FV – CAN EMULATOR

Audi Mileage Freezer Miles – Miles Stopper – Speedometer Stopper – Speed ​​Filter – Mileage Blocker – Mileage Stop – Can Emulator – Speedometer Adjustment

THIS MODULE IS FIT FOR AUDI MODELS
Audi TT RS – FV With or without Virtual Cockpit
❎ SPEEDOMETER WITH WORKING SPEED INDICATOR:
The activation of the speedometer with functioning speed display in the Audi with virtual cockpit or even with normal speedometer is done by pressing the OK button for 10 seconds, which is located on the steering wheel. Press Ok button for 10 seconds → Mode 1. Ok button for 10 sec. Press → Mode 2
Function mode Mode 1: The actual speed is displayed permanently – only 30% of the actual distance traveled is counted. From 100 Km only 30Km counted.
Mode 2: The actual speed is displayed permanently – only 40% of the actually driven distance is counted. 100/40
Mode 3: Everything in original condition
❗️ In each mode, all assistance systems function properly ❗️
❎ ACTIVATION OF THE CAN FILTER/BLOCKER FOR AUDI WITHOUT  SPEED INDICATOR:
Activation / deactivation of the odometer filter:

Mode 1

Simultaneously press the return button ↩️ on the steering wheel and the arrow key to the left ◀️,
the kilometers are not recorded.
The Km / h speedometer always works up to a speed of 20 km / h.
Above 20 km / h the speedometer works for 10 seconds. (Acceleration phase)
After 10 seconds, the Km / h speedometer stops and drops to zero.
If you come to a standstill or a speed below 20 km / h, the correct speed will be displayed again for 10 seconds.
✅ The head up display always shows the actual speed ✅

Mode 2

If you simultaneously press the return button ↩️ on the steering wheel and the OK button 🆗,
Only half of the kilometers driven will be recorded. (50%)
The tachometer in this mode works continuously but displays half the actual speed.
✅ The head up display always shows the actual speed ✅

Mode normal

Simultaneously b the return button ↩️ on the steering wheel and the button to the right ▶️,
The kilometers are recorded completely and everything works as usual.

The module saves the setting automatically and does not require any additional activation after rebooting.
Each mode can be activated or deactivated at any time, both while driving and while stationary.

CAN FILTER FOR AUDI TT RS FV ADVANTAGES:
Easy and fast to install, original high-quality plug-in system via plug and play✅
No soldering or cutting wires required✅
When active, the kilometers are not recorded✅
No error messages in the speedometer or navigation✅
Otherwise there are no error messages in the dashboard✅
If the speedometer is deactivated, the mileage will be recorded as usual✅
A digital installation guide is included✅
The confirmation of the activation takes place in the tachometer✅
This Can Emulator is suitable for testing and tuning purposes✅

You are looking for another speedometer filter for another vehicle? Then click here to the shop:

Superkilometerfilter.com

⚠️ This module is only suitable for testing and tuning purposes
and not for public traffic.
The Can Blocker is not suitable for fraudulent purposes. ⚠️