BENTLEY FLYING SPUR – SPEEDOMETER STOPPER

Also known as: Can Blocker – Can Filter – Speedometer Blocker – Speedometer Filter

This is the right speedometer stopper for Bentley Flying Spur

Stops counting the distance traveled with simple key combination

Can be activated / deactivated either while driving or when stationary

No soldering or cutting of cables required

Original and high-quality workmanship via a Plug & Play plug-in system

Cruise Control, Lane Keeping Assist and Other Assistants will work without any interference

Opening of control units is not required

🔻Our kilometer filter / speedometer stopper is easy to operate with certain key combinations. While in the active state, the module blocks the count of the odometer. Therefore, the distance traveled is no longer counted by the vehicle. Once the module is deactivated, the distance traveled will count as usual and the module will be “invisible” for the ECUs. The device can be activated or deactivated, either while driving or when stationary.🔺

❎ SPEEDOMETER WITH WORKING SPEED INDICATOR:
The activation of the speedometer with functioning speed display in Bentley with either virtual cockpit or normal speedometer is done by pressing the OK button for 10 seconds (located on the steering wheel). Press Ok button for 10 seconds → Mode 1. Press Ok button again for 10 seconds → Mode 2
Function mode
Mode 1: The actual speed is displayed permanently – only 10% of the actually driven distance is counted (E.g. From 100 KM only 10KM counted).
Mode 2: The actual speed is displayed permanently – only 3% of the actually driven distance is counted (E.g. From 100 KM only 3 KM counted).
Mode 3: Everything is in original condition
❗️ All assistance systems function properly in all modes ❗️
❎ ACTIVATION OF THE CAN FILTER/BLOCKER FOR BENTLEY WITHOUT A FUNCTIONING SPEED IN THE DASH:
Activation / Deactivation of the odometer filter:

Mode 1

Simultaneously press the return button ↩️ (situated on the steering wheel) and the arrow key to the left ◀️
The distance traveled will no longer be counted.
Speed indicator only works up to a speed of 20 km/h.
Above 20 km/h the speedometer will work for 10 seconds (Acceleration phase).
After 10 seconds, the speedometer stops working and a speed indicator drops to 0.
If you stop the car or slow down (below 20 km/h)  the correct speed will be displayed again for 10 seconds.
✅ The head up display always shows the actual speed ✅

Mode 2

Simultaneously press the return button ↩️ (situated on the steering wheel) and OK button 🆗
Only half of the distance (50%) traveled will be recorded.
The tachometer in this mode does not stop working, but displays half of the actual speed.
✅ The head up display always shows the actual speed ✅

Normal Mode

Simultaneously press the return button ↩️ (situated on the steering wheel) and the button to the right ▶️
The distance traveled will be counted as normal and everything will work flawlessly.

The Can Blocker always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while driving or when stationary.

SPECIAL FEATURES OF BENTLEY NEW FLYING SPUR CAN FILTER:
Easy and fast to install with original, high-quality plug-in system ✅
No soldering or cutting of wires required ✅
While the device is active, the distance traveled is not recorded ✅
When the module is deactivated, the mileage will be recorded as usual ✅
No error messages displayed on the speedometer, dashboard or navigation panel ✅
A digital installation guide is included✅
The confirmation of the activation will be displayed on the tachometer ✅

Are you looking for a device for another vehicle? Then press here

Superkilometerfilter.com

⚠️ Attention! This device is appropriate only for testing and tuning purposes and not for the public traffic.
The Can Blocker is not suitable for fraudulent purposes ⚠️