Bentley Mulsanne – Speedometer Stopper – Kilometers
Can Blocker – Can Filter – Speedometer Blocker – Speedometer Filter

The right speedometer stopper for the Bentley Mulsanne

Stops the kilometer count with little effort by rapid activation

Can be activated / deactivated both while driving and while stationary

No soldering or cutting through cables necessary

Original and high-quality workmanship via a Plug & Play plug-in system

Cruise Control, Lane Keeping Assist and Other Assistants will continue to work

No opening of control units necessary

🔻Our kilometer filter / speedometer stopper is easy to operate via a key communication. The module blocks the count of the odometer in the active state, so that the kilometers are no longer counted by the vehicle. Once the module is deactivated again, count the kilometers again and the module is thus “invisible” for the ECUs. The speedometer stopper can be optionally activated and deactivated, whether at standstill or while driving.🔺

❎ SPEEDOMETER WITH WORKING SPEED INDICATOR:
The activation of the speedometer with functioning speed display in the Bentley with virtual cockpit or even with normal speedometer is done by pressing the OK button for 10 seconds, which is located on the steering wheel. Press Ok button for 10 seconds → Mode 1. Ok button for 10 sec. Press → Mode 2
 
Function mode Mode 1: The actual speed is displayed permanently – only 10% of the actual distance traveled is counted. From 100 Km only 10Km counted.
 
Mode 2: The actual speed is displayed permanently – only 3% of the actually driven distance is counted. 100/3
 
Mode 3: Everything in original condition
 
❗️ In each mode, all assistance systems function properly ❗️
❎ ACTIVATION OF THE CAN FILTER/BLOCKER FOR BENTLEY WITHOUT A FUNCTIONING SPEED IN THE DASH IS DONE IN THIS WAY:
Activation / deactivation of the odometer filter:

Mode 1

Simultaneously press the return button ↩️ on the steering wheel and the arrow key to the left ◀️,
the kilometers are not recorded.
The Km / h speedometer always works up to a speed of 20 km / h.
Above 20 km / h the speedometer works for 10 seconds. (Acceleration phase)
After 10 seconds, the Km / h speedometer stops and drops to zero.
If you come to a standstill or a speed below 20 km / h, the correct speed will be displayed again for 10 seconds.
✅ The head up display always shows the actual speed ✅

Mode 2

If you simultaneously press the return button ↩️ on the steering wheel and the OK button 🆗,
Only half of the kilometers driven will be recorded. (50%)
The tachometer in this mode works continuously but displays half the actual speed.
✅ The head up display always shows the actual speed ✅

Mode normal

Simultaneously b the return button ↩️ on the steering wheel and the button to the right ▶️,
The kilometers are recorded completely and everything works as usual.

The module saves the setting automatically and does not require any additional activation after rebooting.
Each mode can be activated or deactivated at any time, both while driving and while stationary.

CAN FILTER FOR BENTLEY MULSANNE ADVANTAGES:
Easy and fast to install, original high-quality plug-in system via plug and play✅
No soldering or cutting wires required✅
When active, the kilometers are not recorded✅
No error messages in the speedometer or navigation✅
Otherwise there are no error messages in the dashboard✅
If the speedometer is deactivated, the mileage will be recorded as usual✅
A digital installation guide is included✅
The confirmation of the activation takes place in the tachometer✅
This Can Emulator is suitable for testing and tuning purposes✅

You are looking for another speedometer filter for another vehicle? Then click here to the shop:

Superkilometerfilter.com

⚠️ This module is only suitable for testing and tuning purposes
and not for public traffic.
The Can Blocker is not suitable for fraudulent purposes. ⚠️