THIS MODULE IS SUITABLE FOR ALL THE MODELS OF DODGE CHARGER THAT WERE RELEASED SINCE 2015

Tacho Stopper – Blocker – Mileage Stopper – Can Filter – Can Blocker – Mileage Stopping – Speedometer – Mileage Blocker – Dodge Tacho Filter – mileage correction -Tacho Filter – Can Emulator – mileage freezer dodge

Model series:

🔸 Dodge Charger SXT Plus – 100th Anniversary Edition
🔹 Dodge Charger SXT
🔸 Dodge Charger SRT 392
🔹 Dodge Charger SRT Hellcat
🔸This module is suitable for Dodge Charger released from 2014.🔸

🔹 Plug & Play plug-in system, with high-quality, original plug connector.🔹

🔸The installation does not require cutting or soldering of cables.🔸

🔹No opening of control units required.🔹

🔸The speed indicator works despite the active speedometer stopper.🔸

🔹Cruise control and lane keeping assist work without interference.🔹

🔸No restrictions or error messages Displayed on the speedometer.🔸

ADVANTAGES:
Dismount the tachometer, disconnect from the plug connector and connect the kilometer filter with the original plug-in connector via Plug & Play. ✅ 
The installation does not require cutting or soldering of cables. ✅
It is activated by pressing a button on the steering wheel. ✅
No error messages displayed on the speedometer, dashboard or navigation panel ✅
Cruise control works without any interference. ✅
All the other functions are fully accessible. Module
A module is delivered with an original connector. Confirmation
The confirmation of the activation will be displayed on the speedometer by brief flashes of two turn signals (therefore pay close attention to it).Package
The package will include an installation instructions. ✅

♻️ Turn On ♻️
To activate the device pressRES button for 3 sec.

Mode 1 is now unlocked. The distance traveled will be halved (for instance, if 2 KM will be driver it will count as 1). The activation will be indicated by 1x flashing of the hazard / warning lights. Speedometer will work without any interference.

To enter Mode 2, you must press RES button again for 3 seconds. After this, the distance traveled will no longer be counted. The activation will be indicated the same way, by 1x flashing of the hazard / warning lights. Speedometer will work without any interference.

❌ Turn Off  ❌
Similar to the activation process, to deactivate the device you have to press RES button for 3 sec.

This is 3rd mode. The distance traveled will count as normal and the module will be disabled. The activation of this mode will be indicated by flashing of hazard / warning sign 3 times .

WHAT IS A SPEEDOMETER STOPPER – CAN FILTER? 🔴
The odometer blocker makes it possible to suppress the counting pulses in the vehicle.
This device is also called Can Blocker, Odometer Freezer or Odometer Blocker. Activation and deactivation of Odometer Stopper can be easily accomplished by pressing several buttons.
We offer a wide variety of odometer devices for various vehicles. The installation process of Can Blocker is the same for all the models.
Installation process of Odometer Stopper is simple and convenient. As it just has to be plugged in between the port of the speedometer and the instrument cluster.
The module can be activated or deactivated anytime, whether car is in motion or in stationary position.

Are you looking for this device for another vehicle? Then follow the link 🌐

Super Kilometers Filters

The Can Blocker always saves the last applied settings. Therefore, you don’t have to make any changes to the settings before starting a car.
Activation and deactivation can take place anytime, whether car is moving or it is in stationary position.

⚠️ Attention! This device is appropriate only for testing and tuning purposes and not for the general usage.
The Can Blocker is not suitable for fraudulent purposes ⚠️