THIS MODULE IS SUITABLE FOR ALL JEEP GRAND CHEROKEE MODELS THAT ARE RELEASED SINCE 2014

Also known as: Tacho Stopper – Blocker – Mileage Stopper – Can Filter – Can Blocker – Mileage Stopping – Speedometer – Mileage Blocker – Tacho Filter – Tacho Filter – Can Emulator – odometer stopper – mileage stopper device

Model series:

🔸 Jeep Grand Cherokee 3.6 V6
🔹 Jeep Grand Cherokee 5.7 V8
🔸 Jeep Grand Cherokee 6.4 V8 SRT
🔹Jeep Grand Cherokee 6.2 SRT Trackhawk
🔸 Jeep Grand Cherokee 3.0 V6 MultiJet
🔹Jeep Grand Cherokee 3.0 V6 CRD
 

🔸 This module is suitable for Jeep Grand Cherokee from 2014 🔸
🔹 Plug & Play plug-in system with high-quality, original plug connector 🔹
🔸 No soldering or cutting of cables or electronic components required 🔸
🔹 No opening of control units required 🔹
🔸 The speed indicator works fine even when the speedometer calibration tool is active 🔸
🔹 The cruise control and lane keeping assist work without any interference 🔹
🔸 No error messages displayed on the speedometer 🔸

SPECIAL FEATURES:
Dismount the odometer, disconnect it and attach the mileage freezer with the original plug connector ✅
The installation does not require cutting or soldering of cables ✅
It can be activated by pressing a button on the steering wheel ✅
No error messages displayed on the speedometer, dashboard or navigation panel ✅
The Cruise control works without any interference ✅
All the other functions are fully accessible as well ✅
A module is delivered with an original connector ✅
The confirmation of the activation will be displayed on the speedometer by brief flashes of turn signals (therefore pay close attention to it) ✅
The package will include an installation instruction ✅

♻️ Turn On ♻️
To activate the device press RES button for 3 sec.

Mode 1 is now unlocked. The distance traveled will be halved (for instance, if 2 KM/Miles will be driver it will count as 1). The activation will be indicated by 1x flash of the hazard / warning lights. Speedometer will work without any interference.

To enter Mode 2, you must press RES button again for 3 seconds. After this, the distance traveled will no longer be counted. The activation will be indicated by 2x flashes of the hazard / warning lights. Speedometer will work without any interference.

❌ Turn Off ❌
Similarly to the activation process, to deactivate the device you have to press RES button for 3 seconds.

This is Mode 3. The distance traveled will count as normal and the module will be disabled. The activation of this mode will be indicated by flashing of hazard / warning sign 3 times.

WHAT IS A SPEEDOMETER STOPPER – CAN FILTER? 🔴
The odometer blocker makes it possible to suppress counting the pulses in the vehicle.
This device is also called Can Blocker, Odometer Freezer or Odometer Blocker. Activation and deactivation of the Odometer Stopper can be easily accomplished by pressing several buttons.
We offer a wide variety of odometer devices for various vehicles. The installation process of Can Blocker is the same for all the models.
The installation process of the Odometer Stopper is simple and convenient. It just has to be plugged in between the port of the speedometer and the instrument cluster.
The module can be activated or deactivated anytime, whether the car is on motion or stationary.

ARE YOU LOOKING FOR A DEVICE FOR ANOTHER VEHICLE? THEN PRESS HERE 🌐
Superkilometerfilter

The Can Blocker always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while driving or when stationary.

⚠️ Attention! This device is appropriate only for testing and tuning purposes and not for the public traffic.
The Can Blocker is not suitable for fraudulent purposes ⚠️