LAMBORGHINI URUS MILEAGE BLOCKER
Also called: Speedometer Stopper – Blocker – Mileage Stopper – Can Filter – Mileage Filter – Speedometer – Can Blocker – Stop Lamborghini Mileage – Turn Off Speedometer – How to Stop My Mileage – Turn Off Odometer – Mileage Blocker Module

🔻 Our kilometer filter / speedometer stopper is easy to operate with certain key combinations. While in the active state, the module blocks the count of the odometer. Therefore, the distance traveled is no longer counted by the vehicle. Once the module is deactivated, the distance traveled will count as usual and the module will be “invisible” for the ECUs. The device can be activated or deactivated, either while driving or when stationary 🔺

SPECIAL FEATURES 🔴
This module can be easily installed and used without interference on  Lamborghini Urus ✔️

Simply dismantle the speedometer, connect the kilometer filter with the original plug-in connector between the speedometer and the instrument cluster and re-install the speedometer. ✔️

Original, high-quality plug-in connector with Plug & Play plug-in ✔️

Soldering or cutting of cables is not required ✔️

It is not necessary to open the control unit ✔️

Can be activated / deactivated either while driving or when stationary ✔️

The speedometer works without any issues, whether Odometer Correction tool is turned on or off ✔️

No error messages displayed on the speedometer, cockpit, dashboard, or navigation panel ✔️

The cruise control and lane keeping assist work without any interference ✔️

The confirmation of the activation will be indicated by the turn signals (right / left) ✔️

INFORMATION ABOUT ACTIVATION & DEACTIVATION OF THE MODULE:
❎ THE ACTIVATION & DEACTIVATION OF THE MILEAGE BLOCKER FOR LAMBORGHINI URUS WITH WORKING SPEED INDICATOR IS DONE THIS WAY:
ACTIVATION
The activation of the speedometer with functioning speed display in the Audi with virtual cockpit or even with normal speedometer is done by pressing the OK button for 10 seconds, which is located on the steering wheel. Press Ok button for 10 seconds → Mode 1. Ok button for 10 sec. Press → Mode 2
Function mode Mode 1: The actual speed is displayed permanently – only 25% of the actual distance traveled is counted. From 100 miles only 25 miles counted.
Mode 2: The actual speed is displayed permanently – only 5% of the actually driven distance is counted. 100/5
DEACTIVATION
Mode 3: Everything in original condition

❗️ In each mode, all assistance systems work properly❗️

❎ THE ACTIVATION & DEACTIVATION OF THE MILEAGE BLOCKER FOR LAMBORGHINI URUS WITHOUT WORKING SPEED INDICATOR IS DONE THIS WAY:
ACTIVATION
Mode 1

Simultaneously press the return button ↩️ on the steering wheel and the arrow key to the left ◀️,
the kilometers are not recorded.
The Km / h speedometer always works up to a speed of 20 km / h.
Above 20 km / h the speedometer works for 10 seconds. (Acceleration phase)
After 10 seconds, the Km / h speedometer stops and drops to zero.
If you come to a standstill or a speed below 20 km / h, the correct speed will be displayed again for 10 seconds.
✅ The head up display always shows the actual speed ✅

Mode 2

If you simultaneously press the return button ↩️ on the steering wheel and the OK button 🆗,
Only half of the kilometers driven will be recorded. (50%)
The tachometer in this mode works continuously but displays half the actual speed.
✅ The head up display always shows the actual speed ✅

DEACTIVATION
Simultaneously b the return button ↩️ on the steering wheel and the button to the right ▶️,
The kilometers are recorded completely and everything works as usual.

Are you looking for a device for another vehicle? Then press here

Superkilometerfilter.com

⚠️ Attention! This device is appropriate only for testing and tuning purposes and not for the public traffic.
The Can Blocker is not suitable for fraudulent purposes ⚠️