SKODA SUPERB III (TYP 3V) ODOMETER BLOCKER / MILEAGE FILTER
Also known as: Trip Odometer – Mileage Stopper – Odometer Correction Tool – Odometer stopper – Can Blocker – Mileage Stopping – Odometer Rollback – Odometer Adjustment – Odometer Blocker

The right module for the Skoda Superb III (Typ 3V)

✔️ SPEEDOMETER WITH WORKING SPEED INDICATOR:
The activation of the speedometer with functioning speed display in Skoda Superb III (Typ 3V) with either virtual cockpit or normal speedometer is done by pressing the OK button for 10 seconds (located on the steering wheel). Press Ok button for 10 seconds → Mode 1. Press Ok button for 10 seconds → Mode 2

Functional sequence:

Mode 1: The actual speed is displayed permanently – only 10% of the actually driven distance is counted (E.g. From 100 KM only 10 KM counted).

Mode 2: The actual speed is displayed permanently – only 20% of the actually driven distance is counted (E.g. From 100 KM only 20 KM counted).

Mode 3: Everything is in original condition ✅

❗️ In every mode, all assistance systems function properly ❗️

✔️ ACTIVATION OF THE TACHO FILTER FOR SKODA SUPERB III (TYP 3V) WITHOUT FUNCTIONING SPEED DISPLAY:
✔️ Switch On ✔️

Keep the OK button pressed while pushing the cruise control arrow up. Modes: OK button and 1x arrow up = 3/4 is counted. 2x up kilometers are halved. 3x up = 1/4 is counted. 4x up = kilometers are no longer counted.

❌ Switch Off ❌

Similarly to switching on, only the arrow key has to be pressed down.

❗️ Attention: when the module is in the active state, the speedometer will only work up to 50 KM/h speed. If you drive faster, the speedometer will be set to zero. ❗️

WHAT IS A SPEEDOMETER STOPPER – CAN FILTER? 🔴
The tacho stopper makes it possible to stop counting the pulses in the vehicle.
This device is also called Can Blocker, Odometer Freezer or Odometer Blocker. Activation and deactivation of the Odometer Stopper can be easily accomplished by pressing several buttons.
We offer a wide variety of odometer devices for various vehicles. The installation process of Can Blocker is the same for all the models.
The installation process of the Odometer Stopper is simple and convenient. It just has to be plugged in between the port of the speedometer and the instrument cluster.
The module can be activated or deactivated anytime, whether the car is in motion or stationary.

The right module for Skoda Superb III (Typ 3V)

🔹 Originals & High-quality processing of the plug-in system 🔹

🔸 All the features are available whether the device is turned on or off 🔸

🔹 Plug & Play plug-in system with original connections 🔹

🔸 No soldering or cutting of cables or electronic components required 🔸

🔹 The ultimate solution to block the odometer for all ECUs in the vehicle 🔹

Easy and fast installation ✔️
Disassemble the odometer, disconnect it and attach speedometer calibration tool with the original plug connector ✔️
The installation does not require cutting or soldering of cables ✔️
It can be activated by pressing a button on the steering wheel ✔️
No error messages displayed on the speedometer, dashboard or navigation panel ✔️
The Cruise control works without any interference ✔️
All the other functions are fully accessible as well ✔️
The confirmation of the activation will be displayed on the speedometer by brief flashes of turn signals (therefore pay close attention to it) ✔️
 

⚙️ The Speedometer Calibration Tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while driving or when stationary ⚙️

Are you looking for a device for another vehicle? Then press here 🌐

Superkilometerfilter.com

⚠️ Attention! This device is appropriate only for testing and tuning purposes. However, not for the public traffic.
Similarly, the Speedometer Calibration Tool is not suitable for fraudulent purposes ⚠️