VW PASSAT ODOMETER BLOCKER / MILEAGE STOP
Mileage Stopper – Odometer Stopper – Speed ​​Filter – Mileage Blocker – Mileage Stop – Can Emulator – Can Blocker

THE RIGHT DEVICE FOR THE VW PASSAT B8
❎ ACTIVATION/DEACTIVATION OF THE CAN BLOCKER WITH WORKING SPEED INDICATOR:
The activation of the CAN Blocker with functioning speed display in the VW with virtual cockpit or normal speedometer is done by pressing down 4x the right wiper lever, which is located on the steering wheel. 4x the right wiper lever → Mode 1. 4x the right wiper lever. → Mode 2…

Mode 1: The actual speed is displayed permanently – only 20% of the actually driven distance is counted. 

Mode 2: The actual speed is displayed permanently – only 30% of the actually driven distance is counted.

Mode 3: Everything in original condition ✅

❗️ In each mode, all assistance systems work properly ❗️

❎ ACTIVATION/DEACTIVATION OF THE CAN BLOCKER WITHOUT WORKING SPEED INDICATOR:
✔️ switch on ✔️

Press and hold the OK button while pushing the cruise control arrow up. Repeat the process to get into the next mode.

Mode 1: 75% of the traveled miles are counted.

Mode 2: 50% of the traveled miles are counted.

Mode 3: 25% of the traveled miles are counted.

Mode 4: miles are no longer recorded.

❌ Switch off ❌

Just like switching on, but instead of the arrow up button you need to press the arrow down button.

❗️ Attention: The speed indicator will only work up to 50 Km/h when the module is in the active state. If you drive faster, the speedometer will be set to zero. ❗️

WHAT IS A MILEAGE STOPPER – CAN FILTER? 🔴
The Odometer Stopper makes it possible to stop the counting up the mileage in the vehicle. The device / Can Blocker is also called Speed Stop or Mileage Freezer. Activating and deactivating the Odometer Freezer can be easily done by pressing a few buttons. With us you get the Cluster filter for different vehicles. The Can Blocker is always installed in the same way. The odometer stopper is simply plugged in quickly and conveniently between the connection of the speedometer and the instrument cluster. The module can be activated or deactivated at any time, whether at standstill or while driving.

🔹 Originals & High-quality processing of the plug-in system 🔹

🔸 All wizards work with the speedometer module 🔸

🔹 Plug & Play plug-in system with original connections. 🔹

🔸 No soldering or cutting of cables or electronic components required 🔸

🔹 The ultimate solution to block the odometer for all ECUs in the vehicle 🔹

Easy and fast installation. ✅
Disassemble the odometer and disconnect it. Then connect the kilometer filter with the original plug connection. ✅
The installation does not require cutting or soldering of cables.
It is activated by pressing a button on the steering wheel. ✅
No error messages in the speedometer or navigation ✅
Cruise control continues to function without exception ✅
Other functions are fully usable ✅
No error messages in the dashboard ✅
The confirmation of the activation takes place in the speedometer by the turn signal flashes ✅
The Can Blocker always saves the last setting. Nothing has to be reset every time you start your journey. Activation and deactivation can take place at any time, both while driving and while stationary.

You are looking for another module for another vehicle? Then continue here: 🌐

Superkilometerfilter.com

⚠️ This module is only suitable for test and tuning purposes and not for public roads. The Can Blocker is not suitable for fraudulent purposes. ⚠️

Johnson Controls Dashboard – MQB – VDO – Motormeter – Odometer Correction