THIS DEVICE IS SUITABLE FOR ALL W907 AND W910 MODELS MADE FROM 2018 TO 2022
● The module can only be used for one vehicle, because the chassis number is stored in the memory!
● The device is designed to change the maximum and minimum speed limits
● Convenient to use
● Easy installation
SPEED LIMIT RELEASE DEVICE MERCEDES SPRINTER W907/W910
To disable the cruise control Mercedes Sprinter models 907/910, you must:
- the first time you connect the tool, the red LED will flash 2 times (80 km/h), if changes have been made to the speed limit, the VIN and the speed limit value will be saved in the device's memory.
Insert the device into the OBD II port. The green LED will light up. Red LED blinks 1 time (2 times on first start).
To reset - press the red button 10 times;
That is, 1 flash for the initial speed limit, or 2 times for 80 km/h if you are using it for the first time. After selecting the desired speed limit value, hold the green button for 1 second. As an indicator, you will see a blinking green LED (red LED off). At the end of the process, both LEDs will flash alternately without stopping.
Remove the tool from the OBD2 port. Setup completed successfully.