Mileage blocker for BMW-4ER BMW on the product page | Kmstop

BMW-4ER

BMW-4ER
1549.00
 €
THIS DEVICE IS SUITABLE FOR ALL BMW 4ER G22/G23/G26/G83, MODELS THAT WERE RELEASED SINCE 2020
  • Speed indicator work (only in certain modes)
  • No error messages from Blind Spot Assist or cruise control failure
  • Do-it-yourself installation
  • Premium-quality plugs and heat-resistant cables
  • The ability to purchase with or without an app

MILEAGE BLOCKER FOR BMW 4ER G22/G23/G26

BMW 4er G22/G23/G26 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL BMW 4ER G22/G23/G26/G83, MODELS THAT WERE RELEASED SINCE 2020

 

SPECIFICATIONS

  • Do-it-yourself (DIY) installation
  • No need to open ECUs
  • Has multiple modes
  • If the vehicle has received a software update, you can simply activate mode two and continue using this device. No exchange or update required
  • Comes with premium-quality plugs and heat-resistant cables
  • No error messages on the speedometer or navigation panel
  • Doesn’t leave a trace if you remove it: no soldering or cutting of cables required
  • Easy to operate with several key combinations
  • After removing the module, the mileage doesn’t increase spontaneously
  • The diagnostic testers cannot discover the mileage altered by BMW Mileage Stopper
  • Select settings once and they will be saved unconditionally
  • Speed indicator work (only in certain modes)
  • Mating face and Ridges on the connector guarantee a smooth installation process
  • Automatic Service adjustment
  • No error messages from Blind Spot Assist or cruise control failure
  • The ability to purchase with or without an app

 

ACTIVATION & DEACTIVATION FOR LIVE COCKPIT

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

 

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle
 

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle
 

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle
 

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle
 

Mode 5
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

BMW 4er G22/G23/G26/G83 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

 

ACTIVATION & DEACTIVATION FOR CURVED DISPLAY

 

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The Assistant systems might be unavailable temporarily.

 

Mode 1
1-2% of the mileage is counted, speed indicator works

The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
~30% of the mileage is counted, speed indicator works

The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
The kilometers are counted at 100% but the average consumption has stopped and is not increasing, speed indicator works

To keep the consumption balanced with the miles, you should regularly switch between modes 1 and 3. See video The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual. The indicator: Turn light x4 flashes only inside the vehicle

 

Online store KMSTOP.COM delivers stop mileage filters all over the world in the shortest possible time.

 

Worldwide delivery:

Company DHL

Company UPS

WhatsApp