Mileage blocker for BMW-3ER G20/G21/G80/G81 BMW on the product page | Kmstop

BMW-3ER G20/G21/G80/G81

CURVED DISPLAY

Year of production: 2019 - 2024

BMW-3ER G20/G21/G80/G81
1549
 €
THIS DEVICE IS SUITABLE FOR ALL BMW 3ER G20/G21/G80/G81 MODELS THAT WERE RELEASED SINCE 2019
  • Speed indicator work (only in certain modes)
  • No error messages from Blind Spot Assist or cruise control failure
  • Do-it-yourself installation
  • Premium-quality plugs and heat-resistant cables
  • The ability to purchase with or without an app

MILEAGE BLOCKER FOR BMW 3ER G20/G21/G80/G81

BMW 3ER G20/G21/G80/G81 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL BMW 3ER G20/G21/G80/G81 MODELS THAT WERE RELEASED SINCE 2019

 

SPECIFICATIONS

 

● DIY installation

● No error messages on the speedometer or navigation panel

● If the vehicle has received a software update, you can simply activate the second mode and continue to use this device. No replacement or update required

● No soldering or cable cutting required, hence no traces

● Simple operation with a few key combinations

● Automatic service correction

● No mileage spontaneous increase after the module has been removed

● No need to open the ECU

● Diagnostic testers cannot detect modified mileage in BMW 3er G20/G21/G80/G81 Mileage Stopper

● Select the settings once and they will be saved unconditionally

● Speed indicator operation (only in certain modes)

● Mating surface and protrusions on the connector guarantee a trouble-free installation process

● No error messages from Blind Spot Assist or cruise control failure

● Purchase option with or without app

 

ACTIVATION AND DEACTIVATION FOR LIVE COCKPIT


Switch modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of distance traveled are approximate and are not binding, as they are affected by the environment (city/traffic/track). And only after a longer run of about 100 km / miles will you be able to see what percentage has actually been accounted for.

 

Mode 1

1. pre-2019 car and no update or live cockpit: Speed indication works and mileage counting is stopped. 1. Car: Speed = original, Mileage Count is approximately 0-1%. Only works with pre-2019 models, no upgrade or live cockpit.

2. car from 2019 or with update and live cockpit: Counts after about 3 km of mileage. Counts 100% !!! 2. Vehicle: To change the mode, turn off the vehicle. The speedometer should be off/black. (Open the door) select the appropriate Mode for your vehicle. Indicator: Turn indicator x1 blinks only inside the car.

 

Mode 2
No speed and mileage counting is stopped for all vehicles

Speed = 3 mph, mileage count is approximately 0-1%. Works on absolutely all vehicles. Indicator: Turn signal indicator x2 only flashes inside the vehicle.

 

Mode 3
Speed indication works and mileage count is reduced to 30%.

Interval counting: stop 50 seconds, count 20 seconds, repeat. 30% is a guideline value. The count is determined by driving conditions. Works regardless of software updates for all vehicles through 2023. Indicator: Turn signal light x3 only flashes inside the vehicle.

 

Mode 4

The speed indication works and the mileage counter is reduced to 40%.

Module deactivated, speedometer and odometer work as normal. Indicator: Turn indicator x4 flashes only inside the car

 

Mode 5

Kilometers are counted at 100%.

Module is deactivated, speedometer and odometer work as normal.
The BMW 3er G20/G21/G80/G81 Kilometer Stopper tool always saves the last settings applied. This way, you don't have to change the settings before you start the car next time.

The device can be activated or deactivated both while driving (only for some vehicles) and when stationary.

 

ACTIVATION AND DEACTIVATION FOR THE CURVED DISPLAY

 

Switch modes via the smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of distance traveled are approximate and are not binding, as they are affected by the environment (city/traffic/track). And only after driving a longer distance (about 100 km/mile) can you see what percentage was actually calculated.

Assistant systems may be temporarily unavailable.

 

Mode 1

1-2% of the mileage is counted, the speed indicator works

Indicator: Turn signal light x1 only flashes inside the car

 

Mode 2

Counts ~30% of mileage, speed indicator light works

Indicator: Turn signal light x2 flashes inside the car only

 

Mode 3

Kilometers are counted at 100%, but average consumption has stopped and is not increasing, speed indicator is working

In order for the consumption to be balanced with the kilometers, you need to switch between mode 1 and 3 regularly. See video Indicator: Turn indicator x3 only flashes inside the car

 

Mode 4

The kilometers are counted 100%.

Module is deactivated, speedometer and odometer work as usual. Indicator: Turn signal light x4 flashes only inside the vehicle

 

Online store KMSTOP.COM delivers stop mileage filters all over the world in the shortest possible time.

 

Worldwide delivery:

Company DHL

Company UPS

WhatsApp