VW ARTEON SPEEDOMETER STOPPER / CAN FILTER
Also known as: Trip Odometer – Mileage Stopper – Odometer Correction Tool – Odometer stopper – Can Blocker – Mileage Stopping – Odometer Rollback – Odometer Adjustment – Odometer Blocker
THE RIGHT DEVICE FOR VW ARTEON
✔️ ACTIVATION / DEACTIVATION OF THE CAN BLOCKER WITH WORKING SPEED INDICATOR:
The activation of the CAN Blocker with functioning speed display in the VW with virtual cockpit or normal speedometer is done by pressing the OK button for 10 seconds , which is located on the steering wheel. Press Ok button for 10 seconds → Mode 1. Press Ok button for 10 sec. → Mode 2 …
Mode 1 : The actual speed is displayed permanently – only 20 % of the actually driven distance is counted.
Mode 2 : The actual speed is displayed permanently – only 30 % of the actually driven distance is counted.
Mode 3 : Everything in original condition ✔️
❗️ In each mode, all assistance systems work properly ❗️
✔️ ACTIVATION / DEACTIVATION OF THE CAN BLOCKER WITHOUT WORKING SPEED INDICATOR:
✔️ Switch On ✔️
Press and hold the OK button while pushing the cruise control arrow up. Repeat the process to get into the next mode.
Mode 1: 75% of the traveled miles are counted.
Mode 2: 50% of the traveled miles are counted.
Mode 3: 25% of the traveled miles are counted.
Mode 4: miles are no longer recorded.
❌ Switch Off ❌
Just like switching on, but instead of the arrow up button you need to press the arrow down button.
❗️ Attention: The speed indicator will only work up to 50 km / h when the module is in the active state. If you drive faster, the speedometer will be set to zero. ❗️
WHAT IS A MILEAGE STOPPER – CAN FILTER? 🔴
The Odometer Stopper makes it possible to stop counting up the mileage in the vehicle.
This device is also called Odometer Stopper, Speedometer Calibration Tool, Can Blocker, Odometer Freezer, Odometer Correction Tool, or Odometer Blocker. Activation and deactivation of the Odometer Stopper can be easily accomplished by pressing several buttons.
We offer a wide variety of odometer devices for various vehicles. The installation process of Can Blocker is the same for all the models and doesn’t require in-depth knowledge of vehicle’s maintenance. It just has to be plugged in between the port of the speedometer and the instrument cluster.
The module can be activated or deactivated anytime, whether the car is in motion or stationary.
🔹 Originals & High-quality processing of the plug-in system 🔹
🔸 All wizards work with the speedometer module 🔸
🔹 Plug & Play plug-in system with original connections. 🔹
🔸 No soldering or cutting of cables or electronic components required 🔸
🔹 The ultimate solution to block the odometer for all ECUs in the vehicle 🔹
Easy and fast installation ✔️
Dismount the odometer, disconnect it and attach Speedometer Calibration tool with the original plug connector ✔️
The installation does not require cutting or soldering of cables ✔️
It can be activated by pressing a button on the steering wheel ✔️
No error messages displayed on the speedometer dashboard or navigation panel ✔️
Temp, the cruise control and lane keeping assist work without any interference ✔️
All the other functions are fully accessible as well ✔️
The confirmation of the activation will be displayed on the speedometer ✔️
⚙️ The Speedometer Calibration Tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while driving or when stationary ⚙️
Are you looking for a module for another vehicle? Then press here 🌐
Super kilometer filter .com
⚠️ Attention! This device is appropriate only for testing and tuning purposes. However, not for the public traffic.
Similarly, the Speedometer Calibration Tool is not suitable for fraudulent purposes ⚠️
Johnson Controls Dashboard – MQB – VDO – Motormeter – Odometer Correction